⚠️ When one battery is in trouble...Can your system really "cope"?

Many people choose batteries from kWh or kWh per kilowatt hour.

But for engineers, the more important thing is

When a malfunction occurs, can the system still function?

This is what's called Fault Management.

Problems that may arise when one battery is abnormal

1. The capacity of the system is immediately reduced.

When one battery was cut off,

Fire reserve period reduced

Shorter night use

Peak Shaving did not work at full capacity.

2. The rest of the battery needs to bear more load.

When the number of batteries decreases,

But the load of the building is still the same.

The result is

The current per chunk is higher.

The temperature is rising.

Lifetime reduced

Over Current risk increased

3.The SOC of each lump may be unbalanced.

If the system doesn't have proper SOC management,

Could be born.

Not fully charged

Not the most discharged

SOC Jump

Actual use capacity reduced

Both the batteries still have power left.

4. The inverter may not receive complete data.

When the communication of some batteries is abnormal,

Some types of systems may

Communication Fault Alert

Battery Fault

Stop charging.

Stop discharging.

Automatically switch to Grid

Even most batteries are still normal.

5. Reverse Currents

Without an unusual lump separation system,

Current from other batteries

May flow back into the broken lump.

This results in

Hot Extension Point

Busbar took on the extra load.

BMS damaged

The damage spread to the entire system.

6. Multi-layer protection system is more important than capacity.

Nice battery.

Not just BMS.

But there should be multiple levels of protection, such as

✔ Cell Protection

✔ Temperature Protection

✔ Current Protection

✔ Relay Protection

✔ CCS Fuse Protection

✔ Breaker Protection

How does CCS Fuse matter?

CCS Fuse is not a substitute for breakers.

But there's a duty.

Cut off the high-level short circuit current within a short time.

In case of birth,

Internal Short Circuit

MOSFET Failure

Contactor Weld

Busbar Fault

Internal Wiring Fault

CCS Fuse will help.

✅ limit the damage to that battery.

Reduce the likelihood that damage will spread to other nodules.

So what's the difference between BETA +?

BETA + designed the system with Fault Isolation and System Availability in mind.

It's not just increasing battery capacity.

But pay more attention to maintaining system function when abnormalities occur.

Contains

✅ Auto-ID

Automatic detection and identification of each battery

✅ Auto Host

If the main chunk is in trouble, the system can automatically manage the new communication role.

✅ CCS Fuse Protection

Helps limit damage when internal short circuits occur.

✅ Battery Breaker

Each battery can be safely separated from the system.

✅ BETA Monitor.

Monitor the voltage, current, SOC temperature and state of each battery in real time.

Because of good Energy Storage...

It's not a "never waste" system.

But is that system

When the malfunction occurs,

✔ limit damage.

✔ doesn't spread to the whole system.

✔ still working as much as they should.

✔ find out why quickly.

And safely back to service.

This is the concept of professional Energy Storage system. 🔋⚡