Introducing the opening air from Gemini. ✨

Turning on the air conditioner (Haier) to cool and save the cost of electricity along the way can be easily done by adjusting the application according to the following techniques.

1. Temperature setting and proper mode use

• Set the temperature at 25-26 degrees Celsius: It is a level where the body is comfortable and the compressor does not have to work too hard. If you want to cool faster, use the "fan speed" method instead of reducing the temperature.

• Use mainly COOL mode: On normal hot days, this mode will be cooled most constant.

• Switched to DRY mode on a rainy day: If the weather is high in humidity outside (e.g. after rain), using DRY mode will reduce the humidity in the air, making us feel more comfortable without lowering the temperature.

2.Refrigeration technique (saves 10-20% of power)

• Turn on the fan: Turning on the fan alongside turning on the air at 26-27 degrees will spread the cool wind and increase evaporation of sweat on the skin, making us feel cool as a 24-degree room, but eat much less fire.

• Press the TURBO button only for the first period: Use the TURBO button for the first 10-15 minutes to deheat and then return to normal mode.

3. Using the function on the remote (as pictured)

• SLEEP BUTTON: Bedtime is recommended. The machine will gradually adjust the temperature up automatically 1-2 degrees late at night, which is when the outside air is cooler and our body needs a slightly higher temperature. It helps to sleep well and conserve fire.

• SWING BUTTON: Adjust the swing bloom to send the wind at the widest angle. Avoid giving the wind a prolonged direct blow to prevent discomfort.

4. Critical Care

• Clearing filters uniformly: Observe from the picture, the air conditioner is installed quite high and near the ceiling. The dust is easy to accumulate. The filter should be washed every 2 weeks for good wind turnover.

• Close doors and windows completely: And if possible, heat curtains should be closed directly on the side of the sun to reduce the workload of the machine.

If the air is not cool or the compressor works unusually loudly, washing the air by a skilled technician twice a year will prolong the life and reduce the power.