How do used cars look?

If anyone is looking for a used car to use, the main thing is that the car must have the integrity of the body, and the car will make it long-lasting and least problematic. We often hear the saying in the second-hand car industry: "No heavy collision, no overturning, no editing, no drowning." Because if you get an accident or flood-soaked car, it will be a long-term problem for infinite repair. But how do we know if the car we are looking at has a heavy crash or drowning? What do we look at?

1. The body color of the car. If it is the same color from the factory and no piece has passed the color, it is good to show that the car has never had a reason. It may be used to measure the color of the car if each piece has a color, the color will be thicker than the others. Or if the color thickness is tied all around, the car may recolor the whole car. The color meter will say that the color is the same.

2. The body grooves should have a corresponding distance, such as the door and the cheek of the car on the left / right side. They must be parallel lines, and both sides should have the same distance. The front and trunk caps are closed. There are parallel grooves, similar distance, etc.

3. Open the hood of the car. The plates are still full. The bonnet nut does not move to the same color from the factory. If there has never been a trace of the nut, it has never been removed. The front beam of the car. If there is a plate, it has never been removed or the car has been colored, it shows that there is no crash in front of the beam. See the car body number matches in the license plate.

4. Looking at the arc pellets, open the four sides of the car door and the rear lid, slightly pull out the tire covering the edge of the door, will see the arc pellets welded from the factory. These pellets must be tied. If the car has ever had a heavy crash to the crossbar or hit the trunk, when repaired, these arc pellets will change because they have been repaired.

5. Open under the carpet inside the car. If you open under the carpet inside the car, the steel of the body must not be damp or rusty. This means that you do not drown or soak in water.

6.Engine When starting a stationary machine, not oscillating. The original dry machine must not leak fluids. The engine is still ready to use. This is a cursory look. If we are not a skilled mechanic, it is difficult to see if the engine will have problems after purchase.

7. Of course, buying used cars, everyone likes the number of miles, indicating little use, but today vendors often focus fewer miles, which is not the actual number of miles. If possible, they should choose to buy cars with zero service, allowing us to predict how many miles the last zero, how much the current, whether the number of miles is true or not.

8. Try to drive and see if there is any wrong noise. The steering is accurate, the braking system and, unfortunately, the machine does not vibrate. The acceleration is good.

All of the above is a brief look at used cars, as far as I know, there may be more knowledgeable and proficient people if friends have other points to observe used cars to exchange knowledge.