Buy a door, what to see??

✨ The choice of door purchase. Besides being beautiful and durable, the correct installation of the door and related equipment should be taken into account for long-lasting strong use.

1️⃣ if there is already a transom, measure the width and height of the inner transom (measure the inner edge). The height is measured from the floor to the top. The appropriate door size may be adjusted to no more than 5 mm in front of each side to make it work.

🚪 to change from the original door to the new door, the size can be measured from the original door. The standard size of the shutters is 70x200 cm, 80x200 cm and 90x200 cm. Caution for the old door may not be the same size. Use the most numbers (standard height, mostly 200 cm).

2️⃣ the knob installation has a bolt distance, each model / brand has an unequal distance. If the door is not thick enough, the edge of the bolt hole (on the side of the door) may be exceeded, or the doorknob may not fit the edge of the door, so the door must be more than 1 inch or 2.5 cm thick to fit the size of the bolt hole, and the doorknob can be inserted, the appropriate height of the doorknob is about 95 cm.

3️⃣ the installation of door hinges is generally installed 2-5, depending on the weight of the door, and the height of the door, so that it is easy to open and close, the door does not fall, the hinge does not tear, can effectively carry the door weight.

10 Lightweight doors, such as PVC doors, height up to 2 meters, with 2 hinges attached

10 Other doors with a weight greater than 2 meters in height may be considered to attach 3-4 hinges.

🛠️ Hinged Material Available in 4 Kinds:

10 Steel Strong but vulnerable to rust

10. Strong and durable brass

10. 202 stainless steel is more rust proof than steel, affordable, so it is popular.

10. 304 stainless steel, better rust-proof, moist-resistant, corrosion-resistant

4️⃣ the shaping and coloring of most types of doors can be shaping the side edges, except for PVC doors that cannot be shafted because they are rolled plastic, only 0.5-1 mm thick, and reinforce the surrounding edges with PVC eyebrows to make them stronger. UPVC doors can be shaved no more than 2 mm on each side because they are assembled with a wooden or PVC structure. There is a foam core or other material to bear the force and close the front.

If the door has been refined, the work on the four edges should be painted. For the UPVC door, when finished, it should be covered with gypsum or white putty, and then painted oil on the edge of the bloom so that it will not stain.

I know...What do you need to see? Follow this coordinate. There are plenty of beautiful doors to choose from.

📍 Coordinates: SCGHOME.COM

# scghome # Door # Door transom # Shutters # Door of the house