Car frosted

The core of defogging is to dehumidify the air inside the car and balance the temperature.

❄️ 1. Winter frosted repellent (outside air, cold / dry)

Blemishes on the inside of the car because the air in the car is warmer / humid than the outside air.

Recommended steps

1.Open A / C (Air Compressor): Must be opened to reduce moisture in the air inside the car as dry as possible.

2. Press the Front Glass Frosted Button ($\ Triangle $with Wavy Lines): To Make the Dry Wind Blow Up Front Glass Directly

3. Use Fresh Air (External Air)

: Exposed to outside air. If it is cold and dry outside, it will balance the temperature faster (but do not open too much to make it too cold).

: Recirculation if it feels too foggy or cold outside and relies on A / C to reduce humidity alone.

4. Adjust the temperature: Set the temperature to a comfortable level (such as 23-25 ° C). Avoid setting the heat very hot in the first period because it may cause the blemish to return harder.

🌧️ 2. Repellent frosted in the rain (outside air, cold / humid)

Blemishes on the inside of the car because the air in the car is warmer / moist than the outside air, and the moisture outside is very high.

Recommended steps:

1.Turn on A / C (Air Compressor): Must be turned on. To keep the wind cool and dry.

2. Press the Front Glass Frosted Button ($\ Triangle $with Wavy Lines): To Make the Dry Wind Blow Up Front Glass Directly

3.Use Recirculation (Circulating Air)

: External air intake should be disabled to prevent high moisture from the rain from adding blemish to the cabin.

: Let A / C work to extract moisture from the air inside the car only.

4.Adjust the temperature: Set the temperature to be relatively cool (such as 22-24 ° C) to help the moisture in the air inside the car drop quickly.

🛠️ Rear Window Frosted Chase (Valid for both seasons)

1. Press the rear window defogger button ($\ square $with wavy line) to turn on the heating wire.

2. Close immediately when the blemish is gone.